Mastercam X5 Training Manuals & Other Useful Tutorials
Note: The handbooks listed on this page may be ordered here using Pay Pal or may be ordered over the phone.
* Shipping and Handling and applicable taxes will be calculated at Checkout.
If you have any questions please use the form at the bottom of the page or call Services Four Automation at 978-728-0009.
WE WILL ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Later Version Mastercam Training Manuals also available!!!
The Mastercam Handbooks are created to provide not only applications, but also background and
insight into why and when to apply certain functions and techniques. Throughout the Handbooks practical tips,
hints and best practices are discussed, including industry basics such as speeds and feeds, tool selection and more.
The goal is to create a well educated and skilled NC programmer that is not only immediately employable and productive,
but is also equipped to learn and grow as technology changes.
X5 Suggested Requirements:: Windows XP or Windows 7, Mastercam X5 will require 1024 x 768 resolution to display optimally (1280 X 1024 or better is recommended). A minimum of 3GB of memory is required.
SFA Home Learning Kit
Price: $150.00 (plus*)
Published by In-House Solutions Inc. ISBN: 978-1-926566-80-1
ISBN:
978-1-926566-78-8 ISBN:
978-1-926566-81-8
Call Services Four Automation
978-728-0009
Why should you use SFA's Home Learning Kit?
SFA recommended Tutorials for any user from beginners to advanced.
Bring Mastercam home with you allowing you to work on perfecting your Mastercam skills away from the pressures of work.
You get the full version of Mastercam with the Demo DVD. (Has Limited Saving abilities, 1.5 GB of memory required and a minimum of 1GB of RAM)
Easy to use tutorials giving you step by step instruction for Mastercam Lathe, Mill and Solids
SFA Home Learning Kit Includes: Mastercam X5 Demo DVD The X5 Mill Level 1 Tutorial:
The X5 Lathe Tutorial: The X5 Solids Tutorial: ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam X5 Handbook Volume 1
Price: $98.00 (plus*)
Published by In-House Solutions Inc.
ISBN: 978-1-926566-90-0
Call Services Four Automation
978-728-0009
The Handbook series takes a top-down theoretical approach to teaching Mastercam. Concepts and essential knowledge are included along with practical applications. You not only learn how to use Mastercam, but why things work as they do.
The Mastercam X4 Handbook Volume 1 teaches the basics of 2D modeling and machining; computer fundamentals, basic and advanced CAD drawing, working with CAD data, basic solid modeling, basic 2D Toolpaths such as Mill Contour, pocket and Drill, along with 2D High Speed Toolpaths, Feature Based Machining, Toolpath modification, Toolpath verification and Post Processing.
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam X5 Handbook Volume 2
Price: $98.00 (plus*)
Call Services Four Automation
978-728-0009
Published by In-House Solutions Inc.
ISBN: 978-1-926566-91-7
The Handbook series takes a top-down theoretical approach to teaching Mastercam. Concepts and essential knowledge are included along with practical applications. You not only learn how to use Mastercam, but why things work as they do.
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam X4 Handbook Volume 3
Price: $98.00 (plus*)
Call Services Four Automation
978-728-0009
Published by In-House Solutions Inc.
ISBN: 978-1-926566-48-1
The Handbook series takes a top-down theoretical approach to teaching Mastercam. Concepts and essential knowledge are included along with practical applications. You not only learn how to use Mastercam, but why things work as they do.
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam X5 Advanced Multiaxis Training Tutorial
Price: $80.00 (plus*)
Call Services Four Automation
978-728-0009
Published by In-House Solutions Inc.
ISBN:978-1-926566-87-0
Intended for the advanced Mastercam user, this book contains projects demonstrating various Advanced Multiaxis milling applications. The first tutorials introduce the reader to Mastercam X5’s simplified user interface featuring custom application toolpaths and later transitions to the more advanced interface.
Topics covered include Custom application toolpaths such as Projection, Swarf milling, Impeller floor surface and Impeller blade swarf finish toolpaths. From the Wireframe toolpath family you will learn how to use Parallel to multiple curves and Morph between two curves. You will also generate rough and finish toolpaths from the Surface/Solid toolpath family such as Morph between two surfaces, Parallel cuts and Parallel to surface. A special project is dedicated to familiarize you with the different Collision control strategies.
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam X5 - Art Training Tutorial
Price: $35.00 (plus*)
Call Services Four Automation
978-728-0009
Published by In-House Solutions Inc.
ISBN: 978-1-926566-43-6
The Mastercam X5 Art Training Tutorial book has 7 new inspiring projects which cover geometry creation, importing images from the art library and importing files. Surface creation, tool settings, proper stock setup and toolpath creation is also illustrated in a new well-organized layout.
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam X5 Beginner Training Tutorial
Price: $60.00 (plus*)
Call Services Four Automation
978-728-0009
Published by In-House Solutions Inc. ISBN: 978-1-926566-82-5
This book provides a comprehensive step by step approach to learning Mastercam. It contains pages of projects and helpful hints. The book covers six mill part projects, two lathe projects, three solid projects and an additional 11 exercises. Each tutorial walks you through all the procedures from Geometry Creation to Toolpath instructions, Verification and G Code Generation.
The material covered includes 2D Geometry and Solids Creation, Drilling, Tapping, Contouring, Pocketing, Circle Milling and Slot Milling. It also contains 2D High Speed Toolpaths. Explanations are given for the use of transforming toolpaths as well as proper Stock Setup and Tool Settings.
The Beginner Training Tutorials also include a General Notes chapter with useful tools and shortcuts that make the software easier to use. A description of the 2D toolpath parameters of the Solid menu and Operations Manager are also covered in the General Notes.
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam X5 Design Training Tutorial
Price: $40.00 (plus*)
Call Services Four Automation
978-728-0009
Published by In-House Solutions Inc.
ISBN: 978-1-926566-85-6
The Mastercam X4 Design Training Tutorial provides a comprehensive step-by-step approach to learning Mastercam Design. The book's 17 tutorials now feature completely new parts and a clean new layout, making it easier than ever to follow. Each tutorial walks through all the procedures required for each part's geometry creation. Additionally, 17 practice exercises are provided.
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam X5 Intro to Multiaxis Training Tutorial
Price: $90.00 (plus*)
Call Services Four Automation
978-728-0009
Published by In-House Solutions Inc.
ISBN: 978-1-926566-86-3
The Mastercam X5 Intro to Multiaxis is intended for the advanced Mastercam user. There are 10 projects (5 of which are brand new), plus general notes.
Some of the tutorials also include information on the geometry creation specific for the toolpaths used. The general notes include detail description about Rotary axis control options, Multisurface Classic toolpaths and drill and Circle Mill toolpaths. The new Machine simulation is also covered to check for any collisions between the part, the tool and any of the machine’s components.
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam X5 Lathe Training Tutorial
Price: $40.00 (plus*)
Call Services Four Automation
978-728-0009
Published by In-House Solutions Inc.
ISBN:978-1-926566-80-1
The Mastercam X5 Lathe Training Tutorial consists of 9 part-oriented tutorials and 9 practice exercises.
The book covers:
2D and 3D geometry creation
2D toolpaths such as Face, Rough, Finish, Drilling, Grooving, Grooving on an angle, Inside Boring, Cutoff, Threading and Canned Cycles for Rough and Finish.
Misc –Ops such as Stock Transfer, Stock Flip, Stock Advance and tailstock toolpaths.
C-Axis toolpaths such as Face Contour, Cross Contouring, C-Axis Contour, Face Drilling, Cross Drilling and C-Axis drill.
Importing a SolidWorks file and using the new Turn Profile command to create Geometry.
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam X5 Mill Level 1 Training Tutorial
Price: $65.00 (plus*)
Call Services Four Automation
978-728-0009
Published by In-House Solutions Inc.
ISBN:
978-1-926566-78-8
The Mastercam X5 Mill Level 1 Training Tutorial has been completely revitalized to bring you 10 brand new tutorials and 10 new exercises. A new layout presents the material in a easy to read and easy to learn logical manner. These tutorials and exercises cover the ins and outs of 2D machining. They begin with the basics such as drilling and contour toolpaths progressing to more advanced topics covering multiple setup scenarios and High Speed toolpaths.
Topics covered included in this 800 page book include, 2D geometry and solids creation, tool settings, stock setup, drilling, tapping, contouring, pocketing, circle milling, slot milling, 2D High Sped toolpaths and WCS in multiple fixture applications.
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam X5 Mill Level 3 Training Tutorial
Price: $55.00 (plus*)
Call Services Four Automation
978-728-0009
Published by In-House Solutions Inc.
ISBN: 978-1-926566-79-5
The Mastercam X5 Mill Level 3 Training Tutorial includes new 7 projects that are more complex, real projects. All parts are machinable and include suggested fixtures and tool setups. Clearly laid out objectives and dimensioned step previews make it easier than ever to complete the 7 included tutorials. Additionally, 7 practice exercises and a General Notes chapter provide useful tools, shortcuts and 3D toolpath parameter descriptions that round out this 550+ page book.
Topics covered include 3D Wireframe and Surface geometry creation, Surface Finish and Roughing toolpaths. More emphasis is put on the advanced Surface High Speed toolpaths including the new X5 High Speed toolpaths, STL Stock creation and its use in solid model verification. Machine simulation is also use to check for collisions between the part and the tool and any of the machine’s components.
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam X5 Router Training Tutorial
Price: $60.00 (plus*)
Call Services Four Automation
978-728-0009
Published by In-House Solutions Inc.
ISBN: 978-1-926566-83-2
The Mastercam X5 Router Training Tutorial book has been completely recreated to bring you 8 new projects. These projects are presented in a new easy to learn layout.
The tutorials cover 2D Geometry Creation, drilling, contouring, pocketing, nesting, block drilling, importing graphics to machine. Instructions on tool settings, proper stock setup and creating custom profile tools are provided.
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam X5 Solids Training Tutorial
Price: $35.00 (plus*)
Call Services Four Automation
978-728-0009
Published by In-House Solutions Inc.
ISBN:
978-1-926566-81-8
The Mastercam X5 Solids Training Tutorial offers concise, step-by-step instructions on creating 3D wireframe and solid geometry. Eight new tutorials illustrate a variety of useful solid commands. Topics covered include:
Extrude, Loft, Revolve, Sweep, Boolean Add and Remove, Fillet, Chamfer, Shell, Trimming, Creating Solid patterns, Changing a Solids colors, creating solid geometry from surfaces
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam for SolidWorks X5
Training Tutorial
Price: $95.00 (plus*)
Call Services Four Automation
978-728-0009
Published by In-House Solutions Inc.
ISBN:
978-1-926955-05-6
The Mastercam X5 for SolidWorks, Step-by-Step Programming Examples book provides a comprehensive, “hands-on” method of learning Mastercam X5 for SolidWorks, which is the CAM application that combines the world’s leading modeling software with the most widely used CAM software. The student will learn how to program a variety of different parts requiring most of the toolpath types available with Mastercam X5 for SolidWorks, including extensive emphasis on making parametric changes and update of toolpaths to match the solid model changes.
This book contains 14 lessons with full colour illustrations that cover:
- The manual time-tested 2D machining strategies including Contour, Pocket and Drilling.
- Innovative new 2D High Speed Machining techniques.
- Feature Based Machining for automatic programming of Drill and 2D Mill toolpaths.
- 3D Machining of irregular shaped solid models.
- Focus on toolpath changes matching model updates and complete part swaps.
- Also includes FREE Workflow Reference guide and Mastercam for SolidWorks Quick Reference Guide.
The book assumes the student is already familiar with the basics of using SolidWorks. Extensive modeling skills are not required and anything beyond the basics are detailed in the lesson instructions. The primary focus of this book is to quickly teach how to program solid models using Mastercam X5 for SolidWorks.
Mastercam X5 Wire Training Tutorial
Price: $35.00 (plus*)
Call Services Four Automation
978-728-0009
Published by In-House Solutions Inc.
ISBN:978-1-926566-89-4
The Mastercam X5 Wire Training Tutorial provides users with an excellent resource for learning Mastercam Wire. This practical set of tutorials focuses on 2D & 3D geometry, Wirepath creation such as Contour Wirepath (open contour, multiple contours, die and taper angle), 4-Axis Wirepath and No Core Wirepath. Each tutorial guides users from geometry creation right through to G-Code generation.
Additionally, the Wire Tutorial includes 6 mechanical part projects providing step-by-step instruction for Mastercam Wire, with each section containing screen shots and windows/menus for Wire/Power, Cut Parameters, Compensation, Stops, Leads, Taper, and more.
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Secrets of 5-Axis Machining
Price: $54.95 (plus*)
Call Services Four Automation
978-728-0009
Published: Industrial Press October, 2008
ISBN 9780831133757
Up to now, the best way to get information on 5-axis machining has been by talking to experienced peers in the industry, in hopes that they will share what they learned. Visiting industrial trade shows and talking to machine tool and Cad/Cam vendors is another option, only these people will all give you their point of view and will undoubtedly promote their machine or solution
This unbiased, no-nonsense, to-the-point description of 5-axis machining presents information that was gathered during the author's 30 years of hands-on experience in the manufacturing industry, bridging countries and continents, multiple languages - both human and G-Code. As the only book of its kind, Secrets of 5-Axis Machining will demystify the subject and bring it within the reach of anyone who is interested in using this technology to its full potential, and is not specific to one particular CAD/CAM system. It is sure to empower readers to confidently enter this field, and by doing so, become better equipped to compete in the global market.
Features
Features full-color illustrations through that help to explain the theories and principals.
Includes a CD containing avi files, high quality illustrations, and sample parts.
Table of Contents
Introduction
Common Misconceptions
Know Your Machine
Cutting Strategies
Indexing Work
Simultaneous Work
Machine Simulation
Choosing a Machine for Your Application
Choosing a CAD/CAM System for Your Application
Machine and CAD/CAM System Configuration
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
CNC Control Setup for
Milling and Turning:
Mastering CNC Control Systems
Price: $59.95 (plus*)
Call Services Four Automation
978-728-0009
Published: Industrial Press April 2010
ISBN 9780831133504
Overview
No other book covers CNC control setup in such practical detail. This unique reference from the author of the best-selling CNC Programming Handbook features nearly all of the activities a typical CNC operator performs on a daily basis. Starting with overall descriptions and in-depth explanations of various features, it goes much further and is sure to be a valuable resource for anyone involved in CNC.
Features
Describes working with all types of offsets for milling and turning applications, interpretation of part programs, applying trial cuts, making program changes, and much more.
Places emphasis on troubleshooting many common problems that occur in CNC operations.
Presents suggested methods of correction, along with methods of prevention.
Table of Contents
Concepts of CNC Machining
CNC Machine Specifications
Program Interpretation
Control System
Setup Handle
Operation Panel
Milling Tools-Setup
Setting Part Zero
Machining a Part
Work Offset Settings
Tool Length Offset
Multipart Setup
Cutter Radius Offset
Tools for CNC Lathes
Lathe Offsets
Cutter Radius Offset
Grooving on Lathes
Thread Cutting
Trial Cuts
Offset Change by Program
Coolants
Maintaining Surface Finish
System Parameters
Program Optimization
Troubleshooting
References
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
SolidWorks for Technology and Engineering
Price: $69.95 (plus*)
Call Services Four Automation
978-728-0009
Published: Industrial Press February 2010
ISBN 9780831134150
Overview
This unique text presents a thorough introduction to SolidWorks for students with little or no prior experience. It can be used in virtually any educational setting -- from four-year engineering schools to community colleges and voc/tech schools to industrial training centers -- and will also serve as a reliable reference for on-the-job use or as a self-study manual. The authors have carefully arranged the contents in a clear and logical sequence and have used many hundreds of visuals instead of wordy explanations. Several learning aids have been designed throughout
Features
Good graphical displays rather than long text and definitions are emphasized. Key definitions are boxed in.
Examples provide step by step instructions with excellent graphical displays.
Needless cross-referencing has been eliminated. Each example is presented with all explanations appearing on the same page.
Exercises are presented at the ends of chapters.
A CD provided with the text contains files that are keyed in sequence to the selected examples. Students can follow interactively when learning the procedure with the concepts presented in the text.
Information is provided on the SolidWorks Stimulus Program where applicants can receive a free trial 90-day copy of SolidWorks 2009 software.
The text contains exercises and materials that are key to preparing students for the Certified SolidWorks Associate (CSWA) exam. Appendix B contains a complete key and sample exam solutions
Table of Contents
Introduction to SolidWorks
The SolidWorks User Interface
Creating 2D Sketches on Reference Planes
Advanced Sketch Tools
Creating Extrude, Fillet and Hole Features
Producing 2D Engineering Drawings from 3D Solid Parts
Creating Shells Draft and Rib Features
Patterns, Mirror Features and the Hole Wizard
Creating Sweep, Curve and Loft Features
Creating Assemblies
Producing 2D Engineering Drawings from 3D Solid Assemblies
