Mastercam X4 Training Manuals & Other Useful Tutorials
Note: The handbooks listed on this page may be ordered here using Pay Pal or may be ordered over the phone.
* Shipping and Handling and applicable taxes will be calculated at Checkout.
If you have any questions please use the form at the bottom of the page or call Services Four Automation at 978-728-0009.
WE WILL ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Later Version Mastercam Training Manuals also available!!!
The Mastercam Handbooks are created to provide not only applications, but also background and
insight into why and when to apply certain functions and techniques. Throughout the Handbooks practical tips,
hints and best practices are discussed, including industry basics such as speeds and feeds, tool selection and more.
The goal is to create a well educated and skilled NC programmer that is not only immediately employable and productive,
but is also equipped to learn and grow as technology changes.
X4 Suggested Requirements:: Windows XP or Windows 7, Mastercam X4 will require 1024 x 768 resolution to display optimally (1280 X 1024 or better is recommended). A minimum of 1.5GB of memory is required.
Mastercam X4 Handbook Volume 1
Price: $98.00 (plus*)
Published in 2009 by In-House Solutions Inc.
ISBN: 978-1-926566-26-9
The Handbook series takes a top-down theoretical approach to teaching Mastercam. Concepts and essential knowledge are included along with practical applications. You not only learn how to use Mastercam, but why things work as they do.
The Mastercam X4 Handbook Volume 1 teaches the basics of 2D modeling and machining; computer fundamentals, basic and advanced CAD drawing, working with CAD data, basic solid modeling, basic 2D Toolpaths such as Mill Contour, pocket and Drill, along with 2D High Speed Toolpaths, Feature Based Machining, Toolpath modification, Toolpath verification and Post Processing.
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam X4 Handbook Volume 2
Price: $98.00 (plus*)
Published in 2009 by In-House Solutions Inc.
ISBN: 978-1-926566-47-4
The Handbook series takes a top-down theoretical approach to teaching Mastercam. Concepts and essential knowledge are included along with practical applications. You not only learn how to use Mastercam, but why things work as they do.
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam X4 Handbook Volume 3
Price: $98.00 (plus*)
Published in 2009 by In-House Solutions Inc.
ISBN: 978-1-926566-48-1
The Handbook series takes a top-down theoretical approach to teaching Mastercam. Concepts and essential knowledge are included along with practical applications. You not only learn how to use Mastercam, but why things work as they do.
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam X4 -
Advanced Multi-Axis Tutorial
Price: $80.00 (plus*)
Published in 2009 by In-House Solutions Inc.
ISBN: 978-1-926566-42-9
Intended for the advanced Mastercam user, this book contains projects demonstrating various Advanced Multiaxis milling applications. The first tutorials introduce the reader to the simplified user interface featuring application derived toolpaths and later transitions to the more advanced interface. Topics covered include Projection and Port machining applications, Advanced Multiaxis Swarf & Pencil toolpaths, Advanced Multiaxis Surface Roughing & Finishing toolpaths and several Gouge Check Strategies.
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam X4 - Art Training Tutorial
Price: $35.00 (plus*)
Published in 2009 by In-House Solutions Inc.
ISBN: 978-1-926566-43-6
This tutorial is a comprehensive step-by-step approach to learning Mastercam Art. There are six part projects that demonstrate how to create intricate 3D sculpted images from simple 2D artwork. Each tutorial walks through Geometry Creation to Toolpath instructions, Verification and G-Code generation. Instructions are also provided for importing a scanned bitmap, clip art or a CAD file and converting it into machinable geometry.
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam X4 Beginner Training Tutorial
Price: $60.00 (plus*)
Published in 2009 by In-House Solutions Inc. ISBN: 978-1-926566-27-6
This book provides a comprehensive step by step approach to learning Mastercam. It contains pages of projects, helpful hints.The book covers six mill part projects, two lathe projects, three solid projects and an additional 17 exercises. Each tutorial walks you through all the procedures from Geometry Creation to Toolpath instructions, Verification and G?Code Generation.
The material covered includes 2D Geometry and Solids Creation, Drilling, Tapping, Contouring, Pocketing, Circle Milling and Slot Milling. It also contains 2D High Speed Toolpaths. Explanations are given for the use of transforming toolpaths as well as proper Stock Setup and Tool Settings. The Beginner Training Tutorials also include a General Notes chapter with useful tools and shortcuts that make the software easier to use. A description of the 2D toolpath parameters of the Solid menu and Operations Manager are also covered in the General Notes
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam X4 Design Training Tutorial
Price: $40.00 (plus*)
Published in 2009 by In-House Solutions Inc.
ISBN: 978-1-926566-40-5
The Mastercam X4 Design Training Tutorial provides a comprehensive step-by-step approach to learning Mastercam Design. It contains over 540 pages of projects and helpful hints. The book's 18 tutorials now feature step previews, making it easier than ever to follow. Each tutorial walks through all the procedures required for each part's geometry creation. Additionally, 26 practice exercises are provided.
The material covered includes 2D Geometry and Solids Creation. Explanations are given for the use of WCS in multiple fixture applications. The Design Training Tutorials also includes a General Notes chapter with useful tips, tools, shortcuts and descriptions of each option on the Solid menu.
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam X4 Lathe Training Tutorial
Price: $40.00 (plus*)
Published in 2009 by In-House Solutions Inc.
ISBN:978-1-926566-24-5
The Mastercam X4 Lathe Training Tutorial consists of 7 part-oriented tutorials and 14 practice exercises. Topics covered include 2D toolpaths such as Face, Rough, Finish, Drilling, Inside Boring, Cutoff, Threads and Canned Cycles for Rough and Finish. It also covers 3D geometry creation and C-Axis toolpaths such as Face, Cross Contouring, C-Axis Drilling and C-Axis Contouring.
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam X4 Mill Level 1 Training Tutorial
Price: $65.00 (plus*)
Published in 2009 by In-House Solutions Inc.
ISBN:
978-1-926566-22-1
The Mastercam X4 Mill Level 1 Training Tutorial puts a greater emphasis on the machinability of parts by offering suggested fixtures, setup sheets, recommended tool setups and grouping for multiple setup scenarios. Clearly laid out objectives and dimensioned step previews make it easier than ever to complete the 10 included tutorials. Additionally, 17 practice exercises and a General Notes chapter provide useful tools, shortcuts and 2D toolpath parameter descriptions that round out this 700+ page book.
Topics covered include dynamic plane and dynamic mill toolpaths, 2D geometry and solids creation, drilling, tapping, contouring, pocketing, circle milling, slot milling, 2D high speed toolpaths, stock setup, tool settings and WCS in multiple fixture applications.
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam X4 Mill Level 3 Training Tutorial
Price: $55.00 (plus*)
Published in 2009 by In-House Solutions Inc.
ISBN: 978-1-926566-23-8
The Mastercam X4 Mill Level 3 Training Tutorial now puts more emphasis on the machinability of example parts by offering suggested fixtures, tool setups and grouping for multiple setup scenarios. Clearly laid out objectives and dimensioned step previews make it easier than ever to complete the 8 included tutorials. Additionally, 8 practice exercises and a General Notes chapter provide useful tools, shortcuts and 3D toolpath parameter descriptions that round out this 550+ page book.
Topics covered include 3D wireframe and surface geometry creation, Surface Finish and Roughing toolpaths, advanced Surface High Speed toolpaths, advanced Toolpath Refinement, C-Hooks, STL Stock creation and its use in solid model verification.
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam X4 4/5 Axis Training Tutorial
Price: $90.00 (plus*)
Published in 2009 by In-House Solutions Inc.
ISBN: 978-1-926566-41-2
These training tutorials are intended for the advanced Mastercam user. There are 10 sample projects, plus general notes on 4/5 Axis Milling. Topics covered are 3D Geometry Creation, Axis Substitution, Rotary Axis Positioning, 5 Axis Drilling, Rotary 4-Axis, Swarf 5-Axis, Flow 5-Axis Toolpaths, Curve 5-Axis, Msurf 5-Axis and Port 5-Axis. These comprehensive notes also include information on Rolldie C-Hooks..
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam X4 Router Training Tutorial
Price: $60.00 (plus*)
Published in 2008 by In-House Solutions Inc.
ISBN: 978-1-926566-38-2
This book provides a comprehensive step-by-step approach to learning all levels of Mastercam Router. It includes 9 tutorials that cover 2D Geometry, Drilling, Contouring, Pocketing, Nesting, importing bitmaps using Raster to Vector and tips on modifying the resulting geometry. Instructions on proper Stock Setup, Tool Settings, creating profile bits and using the metric system are provided as well as various other helpful hints. Each tutorial is complete with instructions from Geometry Creation to Toolpath instructions, Verification and G-Code Generation.
A General Notes chapter outlines useful tools and shortcuts that make the software easier to use. It also offers an alphabetical listing of 2D toolpath parameter descriptions, tips on creating 3D geometry, a look at Machine Properties and the Toolpath Manager.
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam X4 Solids Training Tutorial
Price: $35.00 (plus*)
Published in 2009 by In-House Solutions Inc.
ISBN:
978-1-926566-25-2
The Mastercam X4 Solids Training Tutorial offers concise, step-by-step instructions on creating 3D wireframe and solid geometry. Six Tutorials illustrate a variety of useful solid commands. Topics covered include Extrude, Revolve, Sweep and Boolean. This book also demonstrates creating solid geometry from surfaces, using loft commands, shell, chamfer and fillet features.
ONLY SHIP WITHIN THE UNITED STATES OF AMERICA
Mastercam for SolidWorks X4
Training Tutorial
Price: $95.00 (plus*)
Published in 2010 by In-House Solutions Inc.
ISBN:
978-1-926566-61-0
This book provides a comprehensive, step-by-step “hands-on” method of learning Mastercam X4 for SolidWorks, which is the CAM application that combines the world’s leading modeling software with the most widely used CAM software. The student will learn how to program a variety of different parts requiring most of the toolpath types available with Mastercam X4 for SolidWorks, including extensive emphasis on making parametric changes and update of toolpaths to match the solid model changes. This book contains 14 lessons with full color illustrations that cover:
The manual time-tested 2D machining strategies including Contour, Pocket and Drilling.
Innovative new 2D High Speed Machining techniques.
Feature Based Machining for automatic programming of Drill and 2D Mill toolpaths.
3D Machining of irregular shaped solid models.
Specialty techniques used in machining different configurations of SolidWorks models.
Focus on toolpath changes matching model updates and complete part swaps.
Also includes FREE Workflow Reference guide and Mastercam for SolidWorks Quick Reference Guide
The book assumes the student is already familiar with the basics of using SolidWorks. Extensive modeling skills are not required and anything beyond the basics are detailed in the lesson instructions. The primary focus of this book is to quickly teach how to program solid models using Mastercam X4 for SolidWorks.
Mastercam X4 Wire Training Tutorial
Price: $35.00 (plus*)
Published in 2009 by In-House Solutions Inc.
ISBN: 978-1-926566-39-9
This Practical set of training tutorials cover 2D & 3D Geometry, Wirepath Creation such as Contour, Multiple Contours, 4-Axis Wirepath, and No Core Wirepath. Each tutorial walks you through Geometry Creation to G-Code Generation. Six mechanical parts projects provide step-by-step instructions for Mastercam Wire. Each section contains screen shots and windows/menus for Start, Thread, Cut, and Work (STCW) Parameters, Wire Parameters, Lead In/Out, Contour Parameters, Tabs, and more.
