Mastercam X4-MU2 has been released and is ready to be
downloaded from the web.
The download of Mastercam X4-MU2 is safe and clean to install on your computer. You must be on current maintenance to download X4-MU2(Maintenance Update 2)This install goes on top of X4 so there is not need to update post processors. You must have a maintenance expiration date of 11-30-09 or later to run X4 MU2. Please Click Here for installation instructions and the web download of X4-MU2.
2D High Speed Toolpaths (HST) - Basic Overview
of HST. This will cover 2D HST showing you a step by
step orientation of the feature in Mastercam.
Dates & Times
Place
January 27, 2010 1pm-3pm
Windsor Lock, CT
March 16, 2010 9am-11am
Sterling, MA
3D High Speed Toolpaths (HST) - Basic Overview
of HST. This will cover 3D HST showing you a step by
step orientation of the feature in Mastercam.
Dates & Times
Place
February 11, 2010 9am-11am
Sterling, MA
March 31, 2010 1pm - 3pm
Windsor Lock, CT
X4 Feature Based Machining - Milling (FBM) & Drilling (FBD) - Basic Overview of how to use FBM & FBD to assist in your machining process, this will cover
set up
and a step by
step orientation of the feature in Mastercam. Focusing on the MIlling side.
Dates & Times
Place
March 16, 2010 1pm-3pm
Sterling, MA
X4 Mastercam Setup Sheet - Basic introduction into Mastercam's
new set up sheet and active reports.
Dates & Times
Place
February 11, 2010 1pm-3pm
Sterling, MA
Transform Toolpaths - The Transform Toolpaths function creates copies of operations in different orientations. You can use this function to translate operations into multiple copies arranged in a matrix, or a vertical, horizontal, or diagonal row.
Dates & Times
Place
January 20, 2010 1pm-3pm
SFA - Sterling, MA
Understanding Machine & Control Definitions- Basic understanding of how Machine and Control Definitions's interact with Post processors.
Dates & Times
Place
January 20, 2010 9am-11am
SFA - Sterling, MA
X4 Work Coordinate System (WCS) Overview - Work Coordinate System - Basic Overview
of how WCS's work and how to create, name and
save them.
Dates & Times
Place
February 17, 2010 1pm-3pm
Windsor Lock, CT
*Space is limited and will be awarded on a 1st come 1st serve basis.
Pre-registration is required, Please click here to register.
Top Cimco Edit version 5.6 is needed to use this function. Call SFA for information
 Pocket depth options copy.jpg)
