The 23 podiums used in the Vancouver 2010 Olympics were made using Mastercam software!!! View the video here.
Built by a team at the University of British Columbia’s Center for Advanced Wood Processing (CAWP), the raw lumber was sent to a millwork company, where it was dried and fabricated into panels. The panels were then sent to the manufacturing area at CAWP, where, utilizing Mastercam and machining centers, they cut more than 250 unique parts required for each podium.
2D High Speed Toolpaths (HST) - Basic Overview
of HST. This will cover 2D HST showing you a step by
step orientation of the feature in Mastercam.
Dates & Times
Place
May 11, 2010 9am-11am
Sterling, MA
3D High Speed Toolpaths (HST) - Basic Overview
of HST. This will cover 3D HST showing you a step by
step orientation of the feature in Mastercam.
Dates & Times
Place
May 11, 2010 1pm - 3pm
Sterling, MA
X4 Feature Based Machining - Milling (FBM) & Drilling (FBD) - Basic Overview of how to use FBM & FBD to assist in your machining process, this will cover
set up
and a step by
step orientation of the feature in Mastercam. Focusing on the MIlling side.
Dates & Times
Place
June 16, 2010 9am-11am
Sterling, MA
Transform Toolpaths - The Transform Toolpaths function creates copies of operations in different orientations. You can use this function to translate operations into multiple copies arranged in a matrix, or a vertical, horizontal, or diagonal row.
Dates & Times
Place
April 28, 2010 1pm-3pm
Windsor Lock, CT
June 16, 2010 1pm-3pm
SFA - Sterling, MA
Understanding Machine & Control Definitions- Basic understanding of how Machine and Control Definitions's interact with Post processors.
Dates & Times
Place
April 13, 2010 1pm-3pm
SFA - Sterling, MA
X4 Work Coordinate System (WCS) Overview - Work Coordinate System - Basic Overview
of how WCS's work and how to create, name and
save them.
Dates & Times
Place
April 13, 2010 9am-11am
SFA - Sterling, MA
June 30, 2010 1pm-3pm
Windsor Lock, CT
*Space is limited and will be awarded on a 1st come 1st serve basis.
Pre-registration is required, Please click here to register.
Note: You must setup the Backplot to use the HAAS Milling machine. This can be done by selecting Setup>Backplot and HAAS Milling from the Control Type drop down.
 Pocket depth options copy.jpg)
