Mastercam X4-MU1 has been released and is ready to be downloaded from the web.
The download of Mastercam X4-MU1 is safe and clean to install on your computer. You must be on current maintenance to download X4-MU1(Maintenance Update 1)This install goes on top of X4 so there is not need to update post processors. You must have a maintenance expiration date of 09-30-09 or later to run X4 MU1.Please Click HERE for installation instructions and the web download of X4-MU1.
CNC Software, Inc. is proud to release Mastercam® for SolidWorks®, which combines the world’s leading CAD modeling software with the world’s most widely-used CAM software*. Now you can program parts directly in SolidWorks using feature based toolpaths and machining strategies preferred by shops everywhere.
The Core of Your Machining Needs
Mastercam for SolidWorks includes a suite of the most sought-after cutting strategies, including High Speed Machining (HSM) toolpaths. In addition, Mastercam for SolidWorks delivers a powerful set of automated toolpaths that get parts off the machine faster, with little or no handwork. For more information click here or contact Services Four Automation at 978-728-0009.
2D High Speed Toolpaths (HST) - Basic Overview
of HST. This will cover 2D HST showing you a step by
step orientation of the feature in Mastercam.
Dates & Times
Place
January 27, 2010 1pm-3pm
Windsor Lock, CT
3D High Speed Toolpaths (HST) - Basic Overview
of HST. This will cover 3D HST showing you a step by
step orientation of the feature in Mastercam.
Dates & Times
Place
December 17, 1pm-3pm
Sterling, MA
X4 Feature Based Machining - Milling (FBM) - FBM Basic Overview of how to use FBM to assist in your machining process, this will cover
set up
and a step by
step orientation of the feature in Mastercam. Focusing on the MIlling side.
Dates & Times
Place
November 12, 2009 9am-11am
Sterling, MA
X4 Feature Based Machining - Drilling (FBD) - FBD Basic Overview
of how to use FBD to assist in your machining process, this will cover
set up
and a step by
step orientation of the feature in Mastercam. Focusing on the DrIlling side.
Dates & Times
Place
November 24, 2009 1pm-3pm
Windsor Lock, CT
X4 Mastercam Setup Sheet - Basic introduction into Mastercam's
new set up sheet and active reports.
Dates & Times
Place
November 12, 2009 1pm-3pm
SFA - Sterling, MA
December 16, 2009 1pm-3pm
Windsor Lock, CT
Transform Toolpaths - The Transform Toolpaths function creates copies of operations in different orientations. You can use this function to translate operations into multiple copies arranged in a matrix, or a vertical, horizontal, or diagonal row.
Dates & Times
Place
January 20, 2010 1pm-3pm
SFA - Sterling, MA
Understanding Machine & Control Definitions- Basic understanding of how Machine and Control Definitions's interact with Post processors.
Dates & Times
Place
January 20, 2010 9am-11am
SFA - Sterling, MA
X4 Work Coordinate System (WCS) Overview - Work Coordinate System - Basic Overview
of how WCS's work and how to create, name and
save them.
Dates & Times
Place
December 17, 9am-11am
Sterling, MA
*Space is limited and will be awarded on a 1st come 1st serve basis.
Pre-registration is required, Please click here to register.
Top Cimco Edit version 5.5 is needed to use this function. Call SFA for information
 Pocket depth options copy.jpg)
